Trap Dri Moisture Control System
The Trap Dri moisture control trap has been developed to prevent excess water escaping from your water trap and saturating your pipe bag by capturing and retaining moisture in the tube to be emptied. A revolution in moisture control.
The Trap Dri unit is fitted to your existing water trap tube and does not require a zip bag as it can slip through almost any split stock.
Currently supports the standard tube with an external diameter of appx 20 – 23mm used by the majority of pipers or tube with an internal diameter of 19mm.
With Trap Dri installed you will obtain a vastly reduced level of moisture into your bag.
Designed to be so unrestrictive to airflow you won’t even know it’s there and enhance your playing experience.
The trap works by collecting water which condenses inside your water trap tube and locks it inside the Trap Dri. Using a unique combination of air pressure and water flow to draw the water into the Trap Dri unit the water then becomes trapped and can’t make its way to the end of your tube where it can escape through the holes, resulting in better bagpipe performance.
Using Trap Dri will prolong the life of your sheepskin or other animal skin bag by drastically reducing the amount of water your bag has to absorb.
Using the Trap Dri in a synthetic bag by adapting it to fit your current system will greatly enhance the effectiveness of any existing moisture control by locking water away and preventing it running up the tube and soaking your moisture control system.